Easy Mode of Physics Computation

You can set the physics computation easily by adding a check mark to "Easy Mode" in "Basic" tab.

With Easy Mode, some items are set automatically and all you need is make settings in "Basic" tab only which is much easier.
On the other hand, you cannot change the settings in "Input" and "Output" tabs which mean you cannot adjust the settings in details.
So clear the check mark when you want to make settings in details.
Remember that if you click "Easy Mode" after you have made settings, the values are overwritten. 


If you select "Easy Mode" for the sample of bangs, the physics computation is as below;


Input X1/X2
Assign the Parameter in horizontal direction (X axis).
Main examples of Parameters are
Face Angle X (PARAM_ANGLE_X) or  
Body Rotation X (PARAM_BODY_ANGLE_X).

Input Z1/Z2
Assign the Parameter in rotating direction (Z axis).
Main examples of Parameters are
Face Angle Z (PARAM_ANGLE_Z), or
Body Rotation Z (PARAM_BODY_ANGLE_Z).

Output
Assign the Parameter which moves with the influence by physics computation.
If you want to create swinging of bangs, select "RARAM_HAIR_FRONT", or if you want to create swinging of back hair, select "PARAM_HAIR_BACK".

Rename the label

You can change the label name by right-clicking the pull-down menu of label to select "Rename".



Comments